Details
Product
FLUIDING


Description
Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Product
FLUIDING M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
FLUIDING M1M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Product
FLUIDING МS


Description
Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
SUPERFLUID


Description
Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Product
SUPERFLUID M1



Description
Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID M1M


Description
Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID T



Description
Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Product
SUPERFLUID 21M EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Product
SUPERFLUID 21M1M EKO


Description
Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Product
SUPERFLUID 21M1M


Description
Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Product
SUPERFLUID 21 EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Product
SUPERFLUID 21F


Description
Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Product
ADINGPAVER


Description
Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Product
HIDROZIM T



Description
Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Product
HIDROZIM FLUID



Description
Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.


Product
HIDROFOB T


Description
Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Product
HIDROFOB 21


Description
Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Product
HIDROFOB FLUID


Description
Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Product
INGUNIT T



Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT T ЕКО



Description
Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT P

Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Product
USPORUVAC D2 (RETARDER D2)


Description
Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Product
POROCINITEL


Description
Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Product
VRSKA U (BOND U)

Description
Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Product
Superfluid 21MS EKO


Description
Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Product
BITEK А

Description
One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Product
ADINGAKRIL

Description
One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Product
ADINGPOKS К

Description
Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Product
FUGOFIL


Description
Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Product
HIDROKOL

Description
One-component cement-based tile adhesive. It is used for fixing floor and wall ceramic tiles in indoor premises at normal temperatures.

Product
HIDROKOL S

Description
One-component cement-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles exposed to external weather conditions, as well as premises exposed to constant contact with water and moisture: Bathrooms, kitchens, terraces, fountains, laundry rooms, etc.

Product
HIDROKOL SP

Description
One-component cement and polymer-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles, natural stone tiles, granite, marble, pool glass-ceramic tiles, as well as for fixing ceramic tiles by applying “tile on tile” installation.

Product
HIDROKOL Z

Description
One-component adhesive for brick laying-fixing and skim coating of lightweight concrete elements, gypsum blocks and plasterboard sheets.

Product
STIROKOL P

Description
One-component adhesion for fixing and skim coating of polystyrene sheets, extruded polystyrene sheets and compressed mineral wool. It is used for making façade thermal insulation systems.

Product
ADINGPOKS 1Т

Description
Two-component thixotropic epoxy adhesive with excellent adhesion properties. It is used for achieving strong bonds when fixing materials in construction, such as: marble, granite, natural stone, concrete and reinforced concrete elements and other materials on substrates made of concrete, metal, aluminium, etc. It can be used for repairing small areas of segregation in concrete surfaces, for skim coating and spackling of concrete and cement mortar surfaces. It can be used in vertical and horizont

Product
ADINGPOKS Š
Description
Three-component, quick-setting, epoxy adhesive with dielectric properties. It is used for gluing rail tracks at the head of insulated rail joints. It is used as epoxy adhesive for gluing metal, marble, granite blocks or natural stone to substrates made of metal or steel when it is required to achieve high adhesion and excellent mechanical resistance. It is used on horizontal and vertical surfaces.

Details
Product
FLUIDING


Description
Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Product
FLUIDING M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
FLUIDING M1M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Product
FLUIDING МS


Description
Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
SUPERFLUID


Description
Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Product
SUPERFLUID M1



Description
Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID M1M


Description
Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID T



Description
Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Product
SUPERFLUID 21M EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Product
SUPERFLUID 21M1M EKO


Description
Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Product
SUPERFLUID 21M1M


Description
Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Product
SUPERFLUID 21 EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Product
SUPERFLUID 21F


Description
Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Product
ADINGPAVER


Description
Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Product
HIDROZIM T



Description
Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Product
HIDROZIM FLUID



Description
Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.


Product
HIDROFOB T


Description
Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Product
HIDROFOB 21


Description
Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Product
HIDROFOB FLUID


Description
Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Product
INGUNIT T



Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT T ЕКО



Description
Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT P

Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Product
USPORUVAC D2 (RETARDER D2)


Description
Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Product
POROCINITEL


Description
Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Product
VRSKA U (BOND U)

Description
Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Product
Superfluid 21MS EKO


Description
Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Product
BITEK А

Description
One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Product
ADINGAKRIL

Description
One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Product
ADINGPOKS К

Description
Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Product
FUGOFIL


Description
Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Product
ANTIKOROZIN Е



Description
Two-component, solvent-free epoxy coating. It is used for protection against corrosion in steel structures and elements exposed to chemical aggression: cisterns, iron reinforcement, steel structures in industrial facilities, building constructions etc., which are exposed to chemical aggression. Resistant to weather phenomena, ice, snow, acid rain, etc. It has excellent adhesion to steel substrates.

Product
ANTIKOROZIN BB



Description
Coloured coating for protection against corrosion of concrete surfaces. It is used for protection of new, old or repaired concrete and reinforced concrete structures: bridges, silos, tunnels, retaining walls, chimneys, façade elements, etc. It has excellent adhesion to substrate. It is resistant to ice and salt water solutions, as well as weather phenomena and aging. It has high coverage rate. The product is UV stable and protects the concrete against carbonisation. It is manufactured in various

Product
ANTIKOROZIN BR



Description
One-component coloured coating based on synthetic resins and solvents for anti-corrosive and decorative finish of new and repaired concrete surfaces. It is resistant to ice, salts, weather phenomena, as well as, weak chemical aggression. The product is used for protection in reinforced concrete bridges, retaining walls, facades, industrial facilities, cooling towers, chimneys, port facilities, etc. It is UV stable and protects the concrete against carbonisation. It is manufactured in various col

Product
ADINGKOLOR RB


Description
Finishing paint for pools based on synthetic resins and solvents. It is used for decorative and protective finishing of concrete and rendered surfaces exposed to permanent contact with water, UV radiation, weather phenomena, as well as of surfaces maintained with the use of chemical agents. The coating meets the elasticity requirement for this type of paint.

Product
DEKOSIL


Description
Transparent coating based on synthetic resins and solvents. It is used for surface impregnation and as protective finishing (lacquer) of concrete surfaces against weather phenomena and low-grade chemical aggression. The product should be diluted with Rastvoruvac P (Solvent P).In highly porous substrates, it can be used undiluted as a supplement in the application of the first layer of the solvent-based paints Adingkolor-RF and Adingmarker-P.

Product
FASIL V


Description
Silicone agent for surface impregnation of areas made of porous materials: concrete, mortar, interlocking concrete pavers, stone, bricks, roof tiles, asbestos corrugated sheets, pointed surfaces, etc. It can be also used for impregnation of pre-cast elements and supplements made of porous materials. This product is available as CONCENTRATED FASIL V, and after being diluted with water, it is used as FASIL V.

Product
ADINGPOKS TER

Description
Anti-corrosive, tar and epoxy resin-based coating for protection of concrete and metal surfaces. For chemical, mechanical and anti-corrosive protection of concrete and metal structures, pipelines, storage tanks for oil and petroleum products, storage tanks for propane-butane, bundwalls, waste water storage tanks, manholes, channels, power plants, wood drying kilns, underground concrete and metal structures, etc.

Product
Dekosil V


Description
Product for impregnation, curing and protection of new and old concrete surfaces. It is used as a product for curing and protection of fresh concrete surfaces made of polished or stamped concrete, natural stone surfaces, concrete elements – concrete pipes, concrete paving elements, pavement curbs, old concrete surfaces, concrete slabs.

Product
Adingpoks 1B


Description
Epoxy colour coating used for protective and decorative finish of concrete wall surfaces in storage rooms, garages, car parks, production plants, hospitals, laboratories, protection of tunnel linings, pipelines, bundwalls, etc. The coating is characterised with good mechanical and chemical resistance.

Product
HIDROKOL

Description
One-component cement-based tile adhesive. It is used for fixing floor and wall ceramic tiles in indoor premises at normal temperatures.

Product
HIDROKOL S

Description
One-component cement-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles exposed to external weather conditions, as well as premises exposed to constant contact with water and moisture: Bathrooms, kitchens, terraces, fountains, laundry rooms, etc.

Product
HIDROKOL SP

Description
One-component cement and polymer-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles, natural stone tiles, granite, marble, pool glass-ceramic tiles, as well as for fixing ceramic tiles by applying “tile on tile” installation.

Product
HIDROKOL Z

Description
One-component adhesive for brick laying-fixing and skim coating of lightweight concrete elements, gypsum blocks and plasterboard sheets.

Product
STIROKOL P

Description
One-component adhesion for fixing and skim coating of polystyrene sheets, extruded polystyrene sheets and compressed mineral wool. It is used for making façade thermal insulation systems.

Product
ADINGPOKS 1Т

Description
Two-component thixotropic epoxy adhesive with excellent adhesion properties. It is used for achieving strong bonds when fixing materials in construction, such as: marble, granite, natural stone, concrete and reinforced concrete elements and other materials on substrates made of concrete, metal, aluminium, etc. It can be used for repairing small areas of segregation in concrete surfaces, for skim coating and spackling of concrete and cement mortar surfaces. It can be used in vertical and horizont

Product
ADINGPOKS Š
Description
Three-component, quick-setting, epoxy adhesive with dielectric properties. It is used for gluing rail tracks at the head of insulated rail joints. It is used as epoxy adhesive for gluing metal, marble, granite blocks or natural stone to substrates made of metal or steel when it is required to achieve high adhesion and excellent mechanical resistance. It is used on horizontal and vertical surfaces.

Details
Product
FLUIDING


Description
Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Product
FLUIDING M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
FLUIDING M1M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Product
FLUIDING МS


Description
Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
SUPERFLUID


Description
Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Product
SUPERFLUID M1



Description
Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID M1M


Description
Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID T



Description
Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Product
SUPERFLUID 21M EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Product
SUPERFLUID 21M1M EKO


Description
Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Product
SUPERFLUID 21M1M


Description
Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Product
SUPERFLUID 21 EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Product
SUPERFLUID 21F


Description
Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Product
ADINGPAVER


Description
Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Product
HIDROZIM T



Description
Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Product
HIDROZIM FLUID



Description
Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.


Product
HIDROFOB T


Description
Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Product
HIDROFOB 21


Description
Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Product
HIDROFOB FLUID


Description
Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Product
INGUNIT T



Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT T ЕКО



Description
Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT P

Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Product
USPORUVAC D2 (RETARDER D2)


Description
Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Product
POROCINITEL


Description
Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Product
VRSKA U (BOND U)

Description
Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Product
Superfluid 21MS EKO


Description
Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Product
BITEK А

Description
One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Product
ADINGAKRIL

Description
One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Product
ADINGPOKS К

Description
Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Product
FUGOFIL


Description
Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Details
Product
FLUIDING


Description
Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Product
FLUIDING M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
FLUIDING M1M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Product
FLUIDING МS


Description
Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
SUPERFLUID


Description
Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Product
SUPERFLUID M1



Description
Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID M1M


Description
Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID T



Description
Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Product
SUPERFLUID 21M EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Product
SUPERFLUID 21M1M EKO


Description
Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Product
SUPERFLUID 21M1M


Description
Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Product
SUPERFLUID 21 EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Product
SUPERFLUID 21F


Description
Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Product
ADINGPAVER


Description
Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Product
HIDROZIM T



Description
Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Product
HIDROZIM FLUID



Description
Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.


Product
HIDROFOB T


Description
Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Product
HIDROFOB 21


Description
Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Product
HIDROFOB FLUID


Description
Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Product
INGUNIT T



Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT T ЕКО



Description
Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT P

Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Product
USPORUVAC D2 (RETARDER D2)


Description
Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Product
POROCINITEL


Description
Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Product
VRSKA U (BOND U)

Description
Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Product
Superfluid 21MS EKO


Description
Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Details
Product
FLUIDING


Description
Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Product
FLUIDING M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
FLUIDING M1M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Product
FLUIDING МS


Description
Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
SUPERFLUID


Description
Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Product
SUPERFLUID M1



Description
Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID M1M


Description
Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID T



Description
Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Product
SUPERFLUID 21M EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Product
SUPERFLUID 21M1M EKO


Description
Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Product
SUPERFLUID 21M1M


Description
Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Product
SUPERFLUID 21 EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Product
SUPERFLUID 21F


Description
Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Product
ADINGPAVER


Description
Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Product
HIDROZIM T



Description
Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Product
HIDROZIM FLUID



Description
Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.


Product
HIDROFOB T


Description
Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Product
HIDROFOB 21


Description
Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Product
HIDROFOB FLUID


Description
Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Product
INGUNIT T



Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT T ЕКО



Description
Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT P

Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Product
USPORUVAC D2 (RETARDER D2)


Description
Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Product
POROCINITEL


Description
Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Product
VRSKA U (BOND U)

Description
Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Product
Superfluid 21MS EKO


Description
Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Product
ADINGPOKS 1PV

Description
A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Product
ADINGPOKS 2



Description
Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Product
ADINGPOKS 1


Description
Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Product
ADINGSTATIK

Description
Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Product
ADINGPOKS 1P

Description
Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Product
ADINGFAVORIT

Description
Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Product
PODING К

Description
Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Product
ADINGKOLOR RF



Description
Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Product
ADINGMARKER


Description
Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Product
ADINGMARKER P


Description
Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Product
DEKO BETON

Description
Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Product
ADINGPOKS 1BP


Description
Epoxy colour coating used for finishing of concrete floor surfaces in storage rooms, garages, car parks, food production plants, hospitals, laboratories, schools, shopping centres, etc. It allows for aesthetic finish and easy maintenance of floor structures and at the same time provides for long-lasting protection of concrete in case of increased chemical impact and mechanical load.

Product
BITEK А

Description
One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Product
ADINGAKRIL

Description
One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Product
ADINGPOKS К

Description
Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Product
FUGOFIL


Description
Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Details











Product
BITEK А

Description
One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Product
ADINGAKRIL

Description
One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Product
ADINGPOKS К

Description
Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Product
FUGOFIL


Description
Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Product
HIDROKOL

Description
One-component cement-based tile adhesive. It is used for fixing floor and wall ceramic tiles in indoor premises at normal temperatures.

Product
HIDROKOL S

Description
One-component cement-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles exposed to external weather conditions, as well as premises exposed to constant contact with water and moisture: Bathrooms, kitchens, terraces, fountains, laundry rooms, etc.

Product
HIDROKOL SP

Description
One-component cement and polymer-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles, natural stone tiles, granite, marble, pool glass-ceramic tiles, as well as for fixing ceramic tiles by applying “tile on tile” installation.

Product
HIDROKOL Z

Description
One-component adhesive for brick laying-fixing and skim coating of lightweight concrete elements, gypsum blocks and plasterboard sheets.

Product
STIROKOL P

Description
One-component adhesion for fixing and skim coating of polystyrene sheets, extruded polystyrene sheets and compressed mineral wool. It is used for making façade thermal insulation systems.

Product
ADINGPOKS 1Т

Description
Two-component thixotropic epoxy adhesive with excellent adhesion properties. It is used for achieving strong bonds when fixing materials in construction, such as: marble, granite, natural stone, concrete and reinforced concrete elements and other materials on substrates made of concrete, metal, aluminium, etc. It can be used for repairing small areas of segregation in concrete surfaces, for skim coating and spackling of concrete and cement mortar surfaces. It can be used in vertical and horizont

Product
ADINGPOKS Š
Description
Three-component, quick-setting, epoxy adhesive with dielectric properties. It is used for gluing rail tracks at the head of insulated rail joints. It is used as epoxy adhesive for gluing metal, marble, granite blocks or natural stone to substrates made of metal or steel when it is required to achieve high adhesion and excellent mechanical resistance. It is used on horizontal and vertical surfaces.

Details







Product
FLUIDING


Description
Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Product
FLUIDING M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
FLUIDING M1M


Description
Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Product
FLUIDING МS


Description
Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Product
SUPERFLUID


Description
Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Product
SUPERFLUID M1



Description
Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID M1M


Description
Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Product
SUPERFLUID T



Description
Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Product
SUPERFLUID 21M EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Product
SUPERFLUID 21M1M EKO


Description
Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Product
SUPERFLUID 21M1M


Description
Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Product
SUPERFLUID 21 EKO


Description
Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Product
SUPERFLUID 21F


Description
Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Product
ADINGPAVER


Description
Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Product
HIDROZIM T



Description
Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Product
HIDROZIM FLUID



Description
Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.


Product
HIDROFOB T


Description
Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Product
HIDROFOB 21


Description
Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Product
HIDROFOB FLUID


Description
Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Product
INGUNIT T



Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT T ЕКО



Description
Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Product
INGUNIT P

Description
Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Product
USPORUVAC D2 (RETARDER D2)


Description
Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Product
POROCINITEL


Description
Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Product
VRSKA U (BOND U)

Description
Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Product
Superfluid 21MS EKO


Description
Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Product
ADINGPOKS N


Description
Three-component, solvent-free, epoxy adhesive for bonding new to old concrete, cement screed, etc. It has excellent adhesion to substrate. It has high compressive strength, adhesive strength and shear strength. The product can be applied on a wet substrate. It can be applied on horizontal and vertical surfaces. It is eco-friendly and solvent-free. No shrinkage occurs in the process of bonding.

Product
REPARATUR PENETRAT



Description
Pre-coating (primer) used for improving the bond between old and new concrete or cement mortar. It acts as a stabiliser of the old and damaged cement surfaces. It is recommended for repair by using Reparatur Malter-F.

Product
REPARATUR MALTER F1


Description
Polymer-modified, fibre-reinforced, cement-based repair mortar used for repairing concrete and reinforced concrete elements. It has high compressive and tensile strength and excellent adhesion to concrete substrate. When applied, the thickness of one layer may not exceed 7mm.The diameter of the filler nozzle should not exceed:1mm

Product
REPARATUR MALTER F2


Description
Polymer-modified, fibre-reinforced, cement-based repair mortar used for repairing concrete and reinforced concrete elements. It has high compressive and tensile strength and excellent adhesion to concrete substrate. When applied, the thickness of one layer may not exceed 15mm.The diameter of the filler nozzle should not exceed: 2mm.

Product
REPARATUR MALTER F4


Description
Polymer-modified, fibre-reinforced, cement-based repair mortar used for repairing concrete and reinforced concrete elements. It has high compressive and tensile strength and excellent adhesion to concrete substrate. When applied, the thickness of one layer may not exceed 20mm.The diameter of the filler nozzle should not exceed: 4mm.

Product
REPARATUR GLET


Description
Polymer-modified, cement-based levelling compound for concrete surfaces and repaired concrete surfaces. Compliant to EN 1504-3

Product
UBRZUVAC C (ACCELERATOR C)

Description
A quick setting cement based compound. It is used for filling active water leaks or in case of emergence of drops of water on underground facilities, dams, reservoirs, pools, tunnels, mining shafts, basements, shelters, retaining walls, etc.

Product
ADINGPOKS I

Description
Low viscosity, two-component, solvent-free, epoxy resin grout for injecting cracks with thickness of 0.1 to 5.0 mm by using injection and grout pumps. It is used for injecting cracks in substrates of concrete, reinforced concrete, stone and cement mortar. It has high compressive strength and chemical and mechanical resistance. It is used for repairing massive concrete structures, reservoirs, bridge structures, silos, cooling towers, stone structures, etc.

Product
Reparatur malter - FS 2


Description
One-component, cement-based, microfiber reinforced system for repair of concrete and reinforced-concrete structures, intended for mechanical application by spraying (shotcrete application).

Product
Reparatur malter FS4

Description
One-component, cement-based, microfiber reinforced system for repair of concrete and reinforced-concrete structures, intended for mechanical application by spraying (shotcrete application).

Product
HIDROMAL


Description
Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Product
HIDROMAL FLEKS


Description
Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Product
ADINGFLEKS



Description
Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Product
Hidromal fleks 1K


Description
Elastic waterproofing for parts of the buildings exposed to positive and negative hydrostatic pressure, for executing internal and external waterproofing of underground concrete structures, wall and floor waterproofing in basements, pools, technical and drinking water reservoirs, ducts, balconies, flat roofs terraces, toilettes, baths, kitchens and similar. Also it is used for waterproofing parts of buildings, where it can remain unprotected from atmospheric influences for longer period of time

Details
Product
ADINGPOKS 1PV

Description
A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Product
ADINGPOKS 2



Description
Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Product
ADINGPOKS 1


Description
Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Product
ADINGSTATIK

Description
Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Product
ADINGPOKS 1P

Description
Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Product
ADINGFAVORIT

Description
Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Product
PODING К

Description
Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Product
ADINGKOLOR RF



Description
Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Product
ADINGMARKER


Description
Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Product
ADINGMARKER P


Description
Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Product
DEKO BETON

Description
Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Product
ADINGPOKS 1BP


Description
Epoxy colour coating used for finishing of concrete floor surfaces in storage rooms, garages, car parks, food production plants, hospitals, laboratories, schools, shopping centres, etc. It allows for aesthetic finish and easy maintenance of floor structures and at the same time provides for long-lasting protection of concrete in case of increased chemical impact and mechanical load.

Product
PLAMMAL S

Description
One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Product
PLAMMAL 3D
Description
Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye

Details
Product
ADINGPOKS 1PV

Description
A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Product
ADINGPOKS 2



Description
Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Product
ADINGPOKS 1


Description
Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Product
ADINGSTATIK

Description
Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Product
ADINGPOKS 1P

Description
Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Product
ADINGFAVORIT

Description
Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Product
PODING К

Description
Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Product
ADINGKOLOR RF



Description
Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Product
ADINGMARKER


Description
Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Product
ADINGMARKER P


Description
Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Product
DEKO BETON

Description
Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Product
ADINGPOKS 1BP


Description
Epoxy colour coating used for finishing of concrete floor surfaces in storage rooms, garages, car parks, food production plants, hospitals, laboratories, schools, shopping centres, etc. It allows for aesthetic finish and easy maintenance of floor structures and at the same time provides for long-lasting protection of concrete in case of increased chemical impact and mechanical load.

Product
PLAMMAL S

Description
One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Product
PLAMMAL 3D
Description
Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye

Details
Product
ADINGPOKS 1PV

Description
A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Product
ADINGPOKS 2



Description
Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Product
ADINGPOKS 1


Description
Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Product
ADINGSTATIK

Description
Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Product
ADINGPOKS 1P

Description
Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Product
ADINGFAVORIT

Description
Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Product
PODING К

Description
Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Product
ADINGKOLOR RF



Description
Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Product
ADINGMARKER


Description
Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Product
ADINGMARKER P


Description
Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Product
DEKO BETON

Description
Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Product
ADINGPOKS 1BP


Description
Epoxy colour coating used for finishing of concrete floor surfaces in storage rooms, garages, car parks, food production plants, hospitals, laboratories, schools, shopping centres, etc. It allows for aesthetic finish and easy maintenance of floor structures and at the same time provides for long-lasting protection of concrete in case of increased chemical impact and mechanical load.

Product
PLAMMAL S

Description
One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Product
PLAMMAL 3D
Description
Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye

Product
HIDROGLET V


Description
Levelling (skim coating) compound for internal wall and ceiling surfaces that have been rendered or made of concrete, plasterboard sheets, etc.

Product
HIDROGLET F


Description
Levelling (skim coating) compound for façade, concrete and rendered surfaces.

Product
HIDROGLET P

Description
Cement-based self-levelling compound used for levelling uneven concrete floor surfaces or cement screeds prior to the installation of parquet flooring, laminate flooring, floor covering or PVC flooring.When applied, the thickness of one layer of Hidroglet-P may not exceed 3mm.The flooring may be installed after 48 hours at a continuous temperature of 20°С.

Product
HIDROGLET P1

Description
Cement-based self-levelling compound used for levelling uneven concrete floor surfaces or cement screeds prior to the installation of parquet flooring, laminate flooring, floor covering or PVC flooring. When applied, the thickness of one layer of Hidroglet-P1 may not exceed 7mm. The flooring may be installed after 48 hours at a continuous temperature of 20°С.

Product
HIDROGLET- PV

Description
A quick setting, cement-based, self-levelling compound used for levelling uneven concrete floor surfaces or cement screeds prior to the installation of parquet flooring, laminate flooring, floor covering or PVC flooring. When applied, the thickness of one layer of Hidroglet-PV may not exceed 3 mm.The flooring may be installed after 24 hours at a continuous temperature of 20°С.

Details
Product
ADINGPOKS 1PV

Description
A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Product
ADINGPOKS 2



Description
Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Product
ADINGPOKS 1


Description
Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Product
ADINGSTATIK

Description
Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Product
ADINGPOKS 1P

Description
Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Product
ADINGFAVORIT

Description
Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Product
PODING К

Description
Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Product
ADINGKOLOR RF



Description
Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Product
ADINGMARKER


Description
Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Product
ADINGMARKER P


Description
Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Product
DEKO BETON

Description
Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Product
ADINGPOKS 1BP


Description
Epoxy colour coating used for finishing of concrete floor surfaces in storage rooms, garages, car parks, food production plants, hospitals, laboratories, schools, shopping centres, etc. It allows for aesthetic finish and easy maintenance of floor structures and at the same time provides for long-lasting protection of concrete in case of increased chemical impact and mechanical load.

Product
PLAMMAL S

Description
One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Product
PLAMMAL 3D
Description
Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye

Details
Product
ADINGPOKS 1PV

Description
A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Product
ADINGPOKS 2



Description
Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.